Home
Contact Info
Gallery
Discussion Board
Online Catalog Steel Tubing & PipeAluminum Tubing & Pipe Selection Guide  
Structural
Plate
Sheet Metal
HR Bars
CF Bars
Alloy Bars
Tool Steel
Tubing
Steel Tubing & Pipe
Stainless Steel
Aluminum
Copper / Brass
Gratings & Expanded Metal
Glossary of Terms

Aluminum Tubing & Pipe Selection Guide



MATERIAL GUIDE
ALUMINUM TUBING and PIPE

EXTRUDED TUBE & PIPE, formed by hot extruding through a die, is available as a seamless or structural grade product. Seamless is extruded over a mandrel utilizing a hollow billet and is the only tubular product recommended for pressure applications. The structural product is extruded over a bridge or porthole die and will contain weld seams that are evident if anodized. Structural products for non-critical applications are available on inquiry.

DRAWN TUBE, a seamless extruded tube is brought to final size by drawing through a die. Closer size tolerances and thinner wall thicknesses than that of extruded tube are available.

Non-Heat Treatable Alloys

3003 (UNS A93003) Drawn tube has excellent resistance to chemical attack and is a frequent choice in the manufacture and design of chemical equipment. Workability and weldability are
excellent. Meets Federal specification WW-T-700/2 and ASTM B210. 3003-H14 drawn tube conforms to AMS 4067.

Heat Treatable Alloys

2011 (UNS A92011) extruded seamless tube for hollow screw machine parts. Where the machinability of 2011 is desired and the metal removal from solid bar stock is great, hollow 2011 screw machine stock can often be the most cost effective way to produce the part. Produced to ASTM B-210.

2024 (UNS A92024) drawn seamless tubing for superior strength tubular applications. 2024-T3 drawn tube conforms to Federal specification WW-T-700/3, Type 1 as well as ASTM B210.

6061 (UNS A96061) tubing and pipe, with approximately double the strength of 3003-H14, has widespread mechanical application. 6061 has good workability and corrosion resistance and is readily weldable by all methods. 6061-T6 drawn tube conforms to Federal specification WW-T-700/6, ASTM B210, and AMS 4082. 6061-T6 extruded seamless tube conforms to QQ-A-200/8, ASTM B221, and AMS 4150. 6061-T6 seamless pipe conforms to MIL-P-25995.

6063 (UNS A96063) tubing and pipe is highly corrosion resistant with good workability and weldability. Finish is pleasing and is suitable for anodizing. Used primarily for architectural applications, (drawn tube T832 used for furniture applications.) 6063-T832 drawn tube conforms to QQ-A-200/9. 6063-T6 seamless pipe conforms to MIL-P-25995.

WEIGHT CONVERSION FACTORS

  1100 6061 3003  
3004 6063 3005 5086
Conversion Factor: 1.00 1.00 1.01 0.979
(.098) (.098) (.099) (0.96)

NOTE: Densities in lbs./cubic inch are indicated in parentheses.

Metal Mart U.S.A. (586) 977-5820
Site Design by
Orange Creative Solutions